NEU » The cable we need is a rollover cable

Cisco CCENT CCNA Certification Exam Tutorial: Crossover Neymar Paris Saint-Germain Jersey , Straightthrough, and Rollover Cables Computers Articles | October 23, 2007

To pass the CCENT and CCNA exams, you've got to know how and when to use different cable types!? Learn all about crossover, straightthrough Womens Neymar Jersey , and rollover cables from Chris Bryant, CCIE #12933.



To pass the Cisco CCENT and CCNA certification exams, you have to know what cable type is appropriate for a given situation. It's also a good idea to know this for working in real-world production networks as well! After all, if we have the wrong cable, we don't have a network!


This is particularly true of the following scenario Authentic Neymar Jersey , where we have:


A laptop connected to a switch? (Cable 3)


Two switches connected to each other? (Cable 2)


A PC connected to a switch? (Cable 1)


This is a very basic and common topology, but we've got three different cable types in there!? Working from top to bottom, let's take a look at the different cables we'll need to make this work.


For Cable 1, we need a straightthrough cable.? A straightthrough cable is used to connect a PC to a switch or hub.? In a straightthrough cable, the wire connected to Pin 1 on one side is connected to Pin 1 on the other Neymar Jersey , the wire connected to Pin 2 on one side is connected to Pin 2 on the other, and so forth.


It's very common to connect two switches to allow them to send data over that connection, and the connection between two switches is called a trunk.? You'll learn all about the particulars of trunking in your CCNA studies, but the first thing we have to do is make sure we have the correct cable!


To allow two switches to communicate with each other, a special cable type is needed.? Regular straight-through cables will not allow two switches to form a trunk.


What we need is a crossover cable.? The wire connected to Pin 1 on one side will no longer be connected to Pin 1 on the other Customized Paris Saint-Germain Jersey , as it was in a straight-through cable.Four wires will "cross over" in a crossover cable:


Local Pin 1 crosses over to Remote Pin 3


Local Pin 2 crosses over to Remote Pin 6


Local Pin 3 crosses over to Remote Pin 1


Local Pin 6 crosses over to Remote Pin 2


Two cables down, one to go!? To connect that laptop directly to a switch, we've got to be careful of two things:


Using the right cable


Connecting the right cable to the right port on the switch


The cable we need is a rollover cable.? All eight wires in the cable will "roll over" to another pin at the remote end, with the wire on Pin 1 at one end rolling over to Pin 8 at the other end, the wire on Pin 2 at one end rolling over to Pin 7 at the remote end Cheap Paris Saint-Germain Jersey , and so forth.


You may also need an adapter for your rollover cable, since one end of the cable is a DB-9 connector, and few if any of today's laptops have such a port.? You probably do have USB ports on your laptop, and you can get an adapter that allows you to connect a rollover cable to your laptop's USB port from just about any cable dealer.